Last Updated: November 11, 2026
The decision behind a truck ramp purchase is rarely about the ramp itself. It is about the thing you need to roll up into the bed: a zero-turn mower, a dirt bike, a side-by-side, a compact generator, or a heavy tool chest. Every one of those loads has a different weight, a different wheelbase, and a different tolerance for a steep angle, and the ramp has to satisfy all three while folding small enough to ride along in the truck. A ramp that looks fine on a product page can feel sketchy when a 600-pound machine is halfway up it.
This guide is written for homeowners, hunters, landscapers, and weekend riders who load a pickup a few times a month and want a folding ramp that does not need a garage to store. Because the listings below are described only by their titles, the comparisons lean on stated length, rated capacity, folding style, and included straps. Where a title is cut off, confirm the remaining details on the listing before you order in 2026. Two car-service ramp sets and a dog ramp also appeared in the results; they are built for other jobs, so they are left out.
Quick Picks
Arejonner 72.5" Heavy Duty Folding Loading Ramps, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves
Included for '6 Best Truck Ramps (November 2026)' as a representative aquarium product in this roundup; selection reflects the product set returned for this topic.
View on Amazon
MAXIVAMN Loading Ramps for Pickup Trucks, 7.5 ft Aluminum ATV Ramps, 2 Pack | 1,500 lb per Pair, 750 lb Each, 89 x 12 in Each, Folding Design, Punch Plate Surface, 2 Safety Straps, for Riding Mowers
Included for '6 Best Truck Ramps (November 2026)' as a representative aquarium product in this roundup; selection reflects the product set returned for this topic.
View on Amazon
Arejonner 72.5" Heavy Duty Folding Loading Ramps with Sandblasted Finish, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves
Included for '6 Best Truck Ramps (November 2026)' as a representative aquarium product in this roundup; selection reflects the product set returned for this topic.
View on Amazon
VEVOR Aluminum Trailer Ramps, 76 x 54 in Tri-Folding Truck Ramps with Straps & Non-Slip Rubber Fingers, 1500LBS Capacity ATV Loading Ramps for Pickup Trucks, Motorcycles, Lawn Mowers, Tractors, Carts
Included for '6 Best Truck Ramps (November 2026)' as a representative aquarium product in this roundup; selection reflects the product set returned for this topic.
View on Amazon
Alloy Steel Motorcycle Ramp, 750 Lbs Capacity, 78in Folding Loading Ramp with Load Straps for Pickup Trucks, Motorcycles, ATVs, UTVs, Lawn Mowers, Dirt Bikes (1)
Included for '6 Best Truck Ramps (November 2026)' as a representative aquarium product in this roundup; selection reflects the product set returned for this topic.
View on Amazon
Evcitn Truck Ramps 75" 1500 LBS 2 Pack, Extra Heavy Duty Loading Ramps for Lawn Mower, Portabe Non Slip Motorcycle Ramps for Pickup Trucks, ATV, Dirt Bikes, UTV
Included for '6 Best Truck Ramps (November 2026)' as a representative aquarium product in this roundup; selection reflects the product set returned for this topic.
View on Amazon| Product | Best for | Key spec from the title |
|---|---|---|
| Arejonner 72.5-inch folding ramps | Mowers and ATVs on a modest budget | 72.5 inch length, 1500 lb capacity, pack of 2 |
| MAXIVAMN aluminum ATV ramps | Longer, gentler climb | 7.5 ft, 750 lb each, 89 x 12 inch each |
| Arejonner sandblasted-finish ramps | Buyers who want a textured surface | Sandblasted finish, 1500 lb capacity |
| VEVOR tri-folding ramps | Compact storage and wide platform | 76 x 54 inch, tri-fold, 1500 lb capacity |
| Alloy steel motorcycle ramp | Single-bike loading | 750 lb capacity, 78 inch folding |
| Evcitn extra heavy duty ramps | Mowers and dirt bikes | 75 inch, 1500 lb, 2 pack |
How to Choose
Match capacity to the loaded weight, not the empty weight
Rated capacity should cover the machine plus whatever sits on it, including the rider and any fuel or cargo. A 1500 lb figure on a pair usually means the load is shared across both ramps, so read whether the listing says per pair or per ramp. One title below states 750 lb each and 1,500 lb per pair, which is the clearest way to write it. Leave a healthy margin: if the machine and rider land near the limit, step up a class instead of trusting the number to the last pound.
Length controls the angle
A longer ramp lowers the climb angle for a given tailgate height. Lowered mowers and street motorcycles with limited ground clearance can scrape on a short ramp, while a 75-inch or longer ramp spreads the rise out. Measure your tailgate height, then compare it to the ramp length. Anything steeper than roughly one unit of rise for every three of run gets uncomfortable for wheeled equipment you are pushing by hand, and it gets worse on wet grass.
Folding style decides storage and strength
Bi-fold ramps pack into a long, flat shape that fits against a bed wall. Tri-fold designs pack shorter but add a hinge that needs to stay aligned. Arch-style and flat-lip attachments both work, but look for a hook, lip, or strap system that locks the ramp to the tailgate so it cannot slide as the load shifts. Rubber fingers or serrated edges at the top add grip, and a carry handle makes a real difference when you load alone.
Surface and weight
Perforated aluminum or punched surfaces shed mud and rain, while solid steel feels planted but weighs more to carry. Check for a non-slip texture and raised side edges. If you will lift the ramps yourself every time, the listed material matters as much as the capacity figure, because a ramp you dread hauling out will eventually get skipped. Budget models tend to cut corners on hinge hardware and strap quality, so inspect those first. Also check the width of each channel against your tire: a wheel that overhangs the edge of a narrow ramp is a hazard no capacity rating fixes.
The 6 Best Options
Arejonner 72.5-Inch Folding Loading Ramps
This pack of two folding ramps is pitched at motorcycles, lawn mowers, ATVs, and UTVs, with a stated 1500 lb capacity and safety straps listed in the title. The 72.5-inch length is a sensible middle ground for a standard pickup bed, long enough for most mowers without turning storage into a puzzle.
- Strength: Two ramps in the pack, so you can space them to match your wheel track.
- Strength: Safety straps appear in the title, which helps keep the ramps tied to the truck.
- Trade-off: The listing text is truncated, so confirm the surface texture and folded size before ordering.
Skip it if you are loading a low-slung sport bike or anything with minimal ground clearance, since 72.5 inches may still produce a steeper angle than you want on a tall tailgate.
MAXIVAMN 7.5 ft Aluminum ATV Ramps
Written for pickup trucks, these aluminum ramps are described as 7.5 ft long and 89 x 12 inches each, with a rating of 750 lb each and 1,500 lb per pair. The folding design and punched surface mentioned in the title point toward easier carrying and better drainage when the ramps get muddy.
- Strength: The longer run reduces the climb angle for heavier ATVs.
- Strength: Aluminum construction is listed, which usually means less weight to lift on and off the truck.
- Trade-off: Each ramp tops out at 750 lb, so a loaded side-by-side near the limit is a poor fit.
Skip it if you load machines that exceed the per-ramp rating or if your storage space cannot handle a nearly 90-inch folded length.
Arejonner Folding Ramps With Sandblasted Finish
This listing shares the 72.5-inch length and 1500 lb capacity of the standard Arejonner pair but adds a sandblasted finish in the title. That texture is the point: it is meant to give tires and boots a rougher surface to bite into, which matters when the ramps are damp from rain or dew.
- Strength: The finish is called out specifically, which is rare in a crowded category.
- Strength: Same intended loads as its sibling, from mowers to UTVs.
- Trade-off: Much of the title is cut off, so confirm strap hardware and folded dimensions on the listing.
Skip it if you are happy with the standard version, since the practical differences come down to surface texture rather than reach or rating.
VEVOR Aluminum Tri-Folding Truck Ramps
The VEVOR listing describes a 76 x 54 inch tri-folding platform with straps and non-slip rubber fingers, rated at 1500 lbs for ATV loading on pickups. The wide platform shape is different from a pair of narrow channels and gives a driver more room for error when guiding a quad up.
- Strength: Rubber fingers are listed for grip where the ramp meets the tailgate.
- Strength: Tri-fold construction should pack into a shorter bundle than a straight ramp of similar reach.
- Trade-off: Extra hinges mean more moving parts to keep clean and aligned.
Skip it if you want two separate channel ramps for a narrow motorcycle, because a wide single platform may be more than you need.
Alloy Steel Motorcycle Ramp, 78 Inch
This is a single folding ramp with a stated 750 lb capacity and 78-inch length, with load straps listed for pickup trucks. The title also names ATVs, UTVs, and lawn mowers, though a single channel suits narrow-tracked bikes best, and the listing text suggests motorcycles are the core use.
- Strength: At 78 inches it offers a gentler slope than many 72-inch options.
- Strength: Alloy steel is listed, which suggests a rigid, planted feel under load.
- Trade-off: Only one ramp, so mowers and quads that need two tracks are not a natural match.
Skip it if your machine has wide-set wheels or if you want to avoid lifting a steel ramp repeatedly.
Evcitn 75-Inch Extra Heavy Duty Truck Ramps
The Evcitn pack is listed as two 75-inch ramps rated at 1500 lbs and labeled non-slip for mowers, motorcycles, ATVs, and pickup trucks. It sits in the same class as the Arejonner pair with slightly longer reach, which gives a marginally easier angle on a tall tailgate.
- Strength: Two-pack format covers both wheel tracks.
- Strength: Non-slip surface is called out in the title.
- Trade-off: The title is truncated, so confirm the folded dimensions and strap hardware on the listing.
Skip it if you need documented anchoring hardware before purchase, because that detail is not clear from the title alone.
Which One Fits Your Situation
You load a riding mower into a short-bed truck
The Evcitn 75-inch pair or the standard Arejonner pair both give you two separate channels sized for typical mower track width. Pick whichever listing confirms the folded size and strap setup you prefer.
You haul a heavier ATV or UTV regularly
The VEVOR tri-fold, with its wide platform and 1500 lb rating, is the better match for a machine that needs stable footing across the full width. Confirm the weight of the machine against the rating first.
You want the gentlest incline possible
The MAXIVAMN 7.5 ft ramps give you the longest stated run in the group, which matters for anything with limited ground clearance. The alloy steel 78-inch single ramp is the runner-up for a lone motorcycle.
You load in wet or muddy conditions
The sandblasted Arejonner variant is the one whose title leans on surface texture, so it is the logical pick when traction underfoot is the main worry.
Common Mistakes
- Reading a per-pair capacity as per-ramp, then loading a machine that overloads both channels.
- Ignoring tailgate height and ending up with an angle that scrapes the machine or spins the tires.
- Skipping the straps, which lets the ramp kick out the moment weight transfers onto it.
- Loading on soft or sloped ground where the lower end can sink or slide.
- Forgetting that rider weight, fuel, and cargo count toward the capacity figure.
Related guides
- Emergency Water Filtration Systems For Families
- Outdoor Dinnerware Set For Patio Entertaining
- Produce Storage Container For Refrigerator
Frequently Asked Questions
How long should a truck ramp be?
Longer is gentler. For a typical pickup tailgate, buyers often look at 72 inches or more for mowers and ATVs. Low-clearance bikes benefit from the longest option you can store.
Are aluminum ramps strong enough?
Capacity ratings in the title are the starting point. Aluminum saves weight, while steel tends to feel more rigid. Always match the rating to your loaded machine with some margin.
Do I need two ramps or one?
Mowers, ATVs, and UTVs have two wheel tracks and generally need a pair or a wide platform. A narrow motorcycle can often use a single channel ramp.
Should I strap the ramps to the truck every time?
Yes. Even a ramp with a lip can creep when a heavy front wheel lands on it, and a loose ramp is the usual way these loading jobs go wrong. Buyers who haul often treat straps or a secondary tie as part of the ramp, not an accessory, and replace frayed ones promptly.
Can I use a car service ramp as a truck ramp?
No. Car ramps are designed to lift a vehicle for service, not to bridge a gap to a truck bed, so they are the wrong tool for loading cargo.
6 Best Machetes (November 2026)
7 Best Arc Floor Lamps (November 2026)
